Compact seal for annular spaces against pressing water
Our Pipe-Seal compact seals are designed for universal use in civil engineering in the sectors of power, gas and water distribution.
They are suitable for the sealing of pipes and core-drilled holes with any diameter and can be installed inside a wall sleeve as well as directly inside a core-drilled hole. By tightening the screw nuts, the metal plates are pressed against the rubber seal ring, so that the elastomer ring expands steadily in all directions and reliably seals the pipeline.
These seal inserts also provide guiding aid and offer acoustic uncoupling.
- Single sealing (closed)
- Single sealing (split)
- Double sealing (closed)
- Double sealing (split)
- Multiple penetration
- Variable penetration DN 100
Versions
EPDM 30 mm
EPDM 40 mm
EPDM 60 mm (2 x 30 mm)
KTW 30 mm
KTW 60 mm (2 x 30 mm)
Nitrile* 30 mm
Nitrile* 60 mm (2 x 30 mm)
FKM Viton 30 mm (3 x 10 mm)
FKM Viton 60 mm (6 x 10 mm)
Silicone on request
Nitrile: not UV-/weather-resistant
Steel elements: V2A/AISI 304, V4A/AISI 316Ti
- Standard version for all common carrier pipes
- Special customized versions
- Multiple-penetration type
- Single sealing and double sealing
- Version for subsequent installation with split pressure plates
- Against pressing water
- High-quality EPDM rubber
- Bending of the carrier pipe possible up to 8°
- Rings and connecting elements made of stainless steel V2A/AISI 304
- Layered ring version DN 100
Pipe-Seal V2A/AISI 304 compact seal
CD-ID [mm] | CP-OD max. [mm] | item number single-layered* closed | item number single-layered* split | item number double-layered** closed | item number double-layered** split |
---|---|---|---|---|---|
CD-ID: core drilling – inside diameter CP-OD: carrier pipe – outside diameter | |||||
60 | 22 | 411-0060-030 | 412-0600-030 | 421-0600-060 | 422-0060-060 |
70 | 35 | 411-0070-030 | 412-0070-030 | 421-0070-060 | 422-0070-060 |
80 | 45 | 411-0080-030 | 412-0080-030 | 421-0080-060 | 422-0080-060 |
100 | 66 | 411-0100-030 | 412-0100-030 | 421-0100-060 | 422-0100-060 |
125 | 87 | 411-0125-030 | 412-0125-030 | 421-0125-060 | 422-0125-060 |
150 | 112 | 411-0150-030 | 412-0150-030 | 421-0150-060 | 422-0150-060 |
200 | 162 | 411-0200-030 | 412-0200-030 | 421-0200-060 | 422-0200-060 |
250 | 212 | 411-0250-030 | 412-0250-030 | 421-0250-060 | 422-0250-060 |
300 | 260 | 411-0300-030 | 412-0300-030 | 421-0300-060 | 422-0300-060 |
350 | 300 | 411-0350-030 | 412-0350-030 | 421-0350-060 | 422-0350-060 |
400 | 350 | 411-0400-030 | 412-0400-030 | 421-0400-060 | 422-0400-060 |
450 | 400 | 411-0450-030 | 412-0450-030 | 421-0450-060 | 422-0450-060 |
500 | 450 | 411-0500-030 | 412-0500-030 | 421-0500-060 | 422-0500-060 |
sizes up to CD/ID 2100 mm on request
* single layer 30 mm rubber disk (EPDM)
** double layer 60 mm rubber disk (EPDM)
PS KombiFlex DN 100, V2A/AISI 304
CD-ID [mm] | CP-OD* [mm] | item number single-layered/split |
---|---|---|
CD-ID: core-drilled hole – inside diameter CP-OD: carrier pipe – outside diameter | ||
100 | 20 – 65 | 412-0100-000 |
* layered ring system
The annular seal can be adapted to the outside diameter of the carrier pipe on site by simply pulling out the corresponding rubber rings.
The order/request form can be printed or e-mailed directly by pressing the button “send to DDL”